8 channel isolated SIRIUS HS-ACC MODULE plus 2 CNT 8 analogue inputs : Voltage or IEPE IEPE sensor supply : 4 or 8 mA Voltage range : ±10V, ±5V, ±1V, ±200mV Bandwidth : 800 kHz Low pass filter : Bypass or 100 kHz (Bessel, 5th order) Input coupling : DC, AC 1Hz (3Hz, 10Hz) A/D converter : 1 MS/s , each channel , 16 bit SAR converter Dynamic range : 90dB All I/O fully galvanic isolated 1000 V TEDS support : for IEPE sensors Connector type : BNC 2 real time counter inputs : Sensor, event and timing mode Connector type: Lemo 1B 7pin 1x CAN 2.0b BUS isolated, 500 V on DSUB-9 USB2 interface, 6-36VDC supply, 2x sync. connector
Strain (¼-, ½- und Full), Voltage (±50V), RTD, Resistance, Counter & dig Inputs
8 Channel SIRIUS STRAIN MODULE 8 pcs strain, RTD, Potentiometer and voltage inputs programmable sensor and bridge excitation up to 20V or 45mA/100mW 1/2 bridge,completion inside programmable 1000 OHM 1/4 bridge,completion inside programmable 120 and 350 OHM shunt and short CAL function 3, 4, 5, 6 wire connection Ranges: ±50V, 10V, 1V, 100mV, Strain: 100mV/V (5mV/V), 40mV/V (2mV/V), 20mV/V (1mV/V) dual multi range Input protection ±500V (between pins) A/D converter : 1 MS/s , each channel , 16 bit SAR converter Dynamic range : 90dB 8 Synchronized REAL TIME COUNTER on separate LEMO connector 1.5 high chassis 1x CAN 2.0b BUS isolated All I/O fully galvanical isolated +-1kV Connector type : 9 pin D-SUB MSI -adapter compatible USB2 interface, 6-36VDC supply, 2x sync. Connector
8 channel SIRIUS HS-ACC MODULE plus 2 CNT 8 analogue inputs : Voltage od IEPE IEPE sensor supply : 4 or 8 mA Voltage range : ±10V, ±5V, ±1V, ±200mV Bandwidth : 300 kHz Low pass filter : Bypass or 100 kHz (Bessel, 5th order) Input coupling : DC, AC 1 Hz A/D converter : 1 MS/s , each channel , 16 bit SAR converter Dynamic range : 90dB TEDS support : for IEPE sensors Connector type : BNC 2 real time counter inputs : Sensor, event and timing mode Connector type: Lemo 1B 7pin 1x CAN 2.0b BUS on DSUB-9 USB2 interface, 6-36VDC supply, 2x sync. connector
Additionally offers measurements for Industrial Acoustic, Structural Analysis and Machinery Diagnosis. Industrial Acoustic: Real time narrow band FFT, Real time 1/1, 1/3, 1/12, 1/24 band octave spectrum, Real time A-, B-, C-, D-weighting, Fast- Slow- Impulse-weighting, Leq-Calculation, Sound Level according IEC 60651, 60804, 61672. Structural Analysis: Measurement of transfer functions (FRF) for SISO, SIMO and MIMO configurations with H1, H2 and Hv algorithm. Excitation can be either an impulse (modal hammer) or continuous. In this case internal function generator (OPT-FGEN) or external generator source might be used. Structure geometry can be created or imported from UNV, online measurements of FRF, coherence, phase and amplitude is possible. Machinery Diagnostics: Order Analysis, rotational and torsional vibration, waterfall diagram. Human Body Vibration according to ISO 8041, ISO 2631-1.
Battery packs for SIRIUS and SBOX data acquisition systems for stand-alone, in-vehicle or remote test and measurement applications. A clever click mechanism allows the battery to be attached to SIRIUS and/or SBOX instruments.
Features
reverse polarity protection
Exchangeable during operation
status display
Nonlinearity
+/- 0.03
Rated Capacity
±980.7
m/s2
I
Rated Output
1
m/s2
Messbereich
±4903
m/s2
Es ist ein Fehler aufgetreten!
Die gewünschte Seite existiert nicht oder es ist ein interner Fehler aufgetreten!
Wenn Sie der Meinung sind, dass hier eine Fehlfunktion aufgetreten ist, so setzten Sie sich bitte mit uns in Verbindung und teilen uns folgende Angaben mit:
