Model variations:
8 channel USB chassis
8-channel modules can be combined to a 32 channel system with an external sync. and power box. Each of these 8 channel systems can be used as individual measurement systems or as a single fully synchronized 32 channel system.
32 channel USB chassis
We also offer a single 16/24/32 channel USB SIRIUS system. This only requires ONE USB interface on your PC/laptop.
SIRIUS fanless
The fanless option covers all the harsh applications with dust, etc... due to the dust sealed enclosure. It is also silent - recommended for acoustic applications in combination with the new SBOX fanless.
S-BOX (embedded PC) with up to 4 SIRIUS chassis in one enclosure
With the S-BOX Dewesoft SIRIUS becomes an up to 32 channel system including an i7 embedded PC running DEWESoft™ Software. It can be set to hold 1 to 4 SIRIUS chassis to get 8, 16, 24 or 32 channels. Each input channel can be chosen from the standard range of SIRIUS modules.
The standard configuration of the PC is an i7 processor, 4 GB RAM and a 64 GB removable solid state disk. The operating system is stored on an internal 8 GB flashdisk, so removing the hard drive with valuable information is easy. The GByte-LAN and WLAN modules provide good connectivity between instruments while seven USB and one VGA connector complete the system. If you need more channels simply connect multiple systems via GBit-LAN and sync to get a system of up to 1000 channels and more. Each system can be used independently or can be combined for bigger measurement tasks. When using the DEWE-NET option, each 32 channel PC has more than enough power for most demanding math operation since the load of calculation is distributed among the computers. With this system configuration performance problems belong to the past! S-BOX includes also a 1 Hz (100 Hz as an option) GPS receiver with real time Kinematic option for down to 2 cm accuracy.
List of different SIRIUS Input/Output Modules:
- ACC module for voltage, IEPE
- ACC+ module for voltage, IEPE, additional Counter-Encoder input
- CHG module for voltage, IEPE and charge
- CHG+ module for voltage, IEPE and charge, additional Counter-Encoder input
- Multi module for voltage, strain, counter, digital I/O and alalog output
- STG module for voltage, strain, potentiometer, RTD
- STG+ module for voltage, strain, potentiometer, RTD, additional Counter-Encoder input
- HV module for high voltages up to ±1200V (±1600V @ High-Speed Version)
- LV module for voltages up to ±50V with sensor power supply (±15V/50mA) for current clamps, etc.
- LV+ module for voltages up to ±50V with sensor power supply (±15V/50mA) for current clamps, etc., additional Counter-Encoder input
- MSI-Adapters for LVDTs, IEPE,-Sensors, RTDs, Thermocouples and Charge Inputs.
- Please also ask for customized I/O Modules.

SIRIUS DAQ system - next generation data acquisition: