SIRIUS Mini: The smallest SIRIUS you can get: 4 non isolated ACC/Voltage channels, 1x counter/Timer (or 3x DIN), USB bus powered, no integrated computer, no Display. To be connected to you PC / Laptop. Including DEWESoft Prof.
These products are requested only from ZSE. Our employees will contact you as soon as possible with an offer.
This product is ordered on request!
An account at myZSE gives you the opportunity to order this product directly.
Additionally offers measurements for Industrial Acoustic, Structural Analysis and Machinery Diagnosis.
Industrial Acoustic: Real time narrow band FFT, Real time 1/1, 1/3, 1/12, 1/24 band octave spectrum, Real time A-, B-, C-, D-weighting, Fast- Slow- Impulse-weighting, Leq-Calculation, Sound Level according IEC 60651, 60804, 61672.
Structural Analysis: Measurement of transfer functions (FRF) for SISO, SIMO and MIMO configurations with H1, H2 and Hv algorithm. Excitation can be either an impulse (modal hammer) or continuous. In this case internal function generator (OPT-FGEN) or external generator source might be used. Structure geometry can be created or imported from UNV, online measurements of FRF, coherence, phase and amplitude is possible.
Machinery Diagnostics: Order Analysis, rotational and torsional vibration, waterfall diagram.
Human Body Vibration according to ISO 8041, ISO 2631-1.
20mA current input adapter with internal shunt 50Ohm, 0.05%, screw terminals in housing for cable fixing. Use for sensors with 0/4…20 mA output. Automatic adapter identification.
5A MSI Adapter with TEDS,
0.1Ohm 0.05% Shunt Resistor
Small Box with 1m cable and DSUB-9 connector and screw terminals
Fits to DEWE-43, Minitaur, SIRIUSi-STG, -STGM, -STGS, -LV
Isotron (constant current powered) adapter for IEPE sensors (accelerometers, microphones)
4 mA const. current, 21 V, 1.5 Hz HPF.
Er verfügt über vier Eingangsbereiche von 1 kpC bis 500 kpC. Wählen sie zusätzlich zur DC-Messung im Kanal-Setup der Dewesoft X3 Software aus vier verschiedenen Hardware-Hochpassfiltern.
Der große Vorteil des DSI-CHG-DC-Adapters ist eine zeitkonstante, praktisch DC-Ladungsmessung mit einem DC-Drift von weniger als 0,1 pC/s für den Eingangsbereich von 500 kpC.
Die Bandbreite des DSI-CHG-DC beträgt 20 kHz für den 500-kpC-Bereich und 200 kHz für den 50-kpC-Bereich. DSI-CHG-DC wird von allen SIRIUS DAQ-Verstärkern mit DSUB9-Eingangsanschlüssen und KRYPTON STG-Verstärkern unterstützt. Die Konfiguration des Host-Verstärkers und die Kalibrierdaten können über TEDS ausgelesen werden.
Charge input adapter for accelerometers or microphones. Range up to 50000 pC, AC coupled with 0.07 Hz, BNC signal connection, max. 100 kHz bandwidth.
Thermocouple adapter. High accuracy cold junction reference measurement, 1 m thermo cable with Mini TC connector, automatic adapter identification.
Please specify TC-Type J, K, T or C.
Pt100, Pt200, Pt500 and Pt1000 adapter. 2, 3 and 4 wire connection methods over 5-pin Binder 710 series connector, automatic adapter identification.
200 Volt input adapter. Differential input configuration over BNC connector, bandwidth and ranges are defined by connected amplifier, automatic adapter identification.
LVDT input interface for DEWE-43A, DS-Minitaur and SIRIUS (9pin).
Generates 4 or 10 kHz excitation forr LVDT-sensors, phase adjustment by potentiometer, output 1 V = 1000 mV/V, automatic adapter identification.
DS-16xLVDTr uses a unique ratiometric architecture to eliminate several of the disadvantages associated with traditional approaches to LVDT interfacing. DS-16xLVDTr combines 16 channels of DSI-LVDT adapters in a 19”-rack compatible housing with 1U height.
The main advantage of the new design is the asynchronous excitation signal provided from an external function generator to a BNC front connector (IN connector). When using multiple DS-LVDTr devices the EXC signal can be daisy-chained from the BNC OUT connector to the BNC IN connector on the other device.
There are 16 DSUB-9M male connectors on the front panel for the connection to the Dewesoft data acquisition system. Each connector includes a trimmer for phase adjustment.
On the back panel are 16 DSUB-9F (female) connectors for the LVDT sensor connection. DS-16xLVDTr supports measurements with full-bridge and half-bridge LVDT sensor types.
CMOS Camera B/W
HD resolution 2048x1088
600 fps VGA resolution
300 fps full HD (online compression JPG)
GiGE interface with POE (4W)
SYNC connector
-5...40°C operating,
54x40x92mm, C-mount objective
IP40 (IP67 option)
Aluminum chassis
Incl. Standard C-mount lens
Incl. cable set 3m, SYNC and Ethernet, incl. POE powersupply
Incl. DEWESoft7 driver requires DEWESOFT-PROF license
Battery packs for SIRIUS and SBOX data acquisition systems for stand-alone, in-vehicle or remote test and measurement applications. A clever click mechanism allows the battery to be attached to SIRIUS and/or SBOX instruments.
Battery packs for SIRIUS and SBOX data acquisition systems for stand-alone, in-vehicle or remote test and measurement applications. A clever click mechanism allows the battery to be attached to SIRIUS and/or SBOX instruments.
This mount can be used to mount SIRIUS data acquisition systems and SBOX data processing computers to the wall, floor or any other flat surface.
ECAT sync junction is used to synchronize acquisition from Dewesoft EtherCAT based data acquisition devices like KRYPTON with USB data acquisition devices like SIRIUS USB and DEWE-43A.
The ECAT sync junction is not required with R1DB/R2DB, R4, R8 or MINITAURs DAQ systems when extended with EtherCAT devices, because the sync junction is already built into the systems.
General top mount for SIRIUS data acquisition systems and/or SBOX data loggers. Mount can be used to fit small instruments, such as DS-CAN2, or any accessory that needs to be firmly fixed to the DAQ system.
Top plate with handle and holder for tablet PC with click mechanism. Fits to SIRIUS and MINITAURs data acquisition systems, SBOX data loggers and battery packs.
Top mounting plate for binding KRYPTON DAQ modules to SIRIUS and MINITAURs data acquisition systems, SBOX data loggers and battery packs that.
Mounting plate for fitting SIRIUS, MINITAURs data acquisition systems, and SBOX data loggers into a 19˝ rack cabinet.
ECAT power junction is used to connect any EtherCAT data acquisition device like KRYPTON or SIRIUS with the power supply and standard PC computer with the RJ45 Ethernet port.
Using Dewesoft processing computers and data loggers like SBOX, KRYPTON CPU, R2DB, R4, R8 or MINITAURs do not require this accessory as the power is provided directly from the mentioned units.
DEWESoft developed and manufactured multi-functional and user-friendly data acquisition instruments since 2000.
Unfortunately a system error has occurred. The page is reloaded. Please log in again if necessary. We apologize.
Enter your e-mail address here to receive an e-mail with a link to reset the password for your myZSE account.
Unfortunately, we cannot guarantee Internet Explorer the full functionality of this website. We recommend that you use a modern browser (e.g. Chrome, Firefox, Edge, Safari). Microsoft also advises against using Internet Explorer for security reasons.
You can download a new browser here: