NTB-100/200 – Network Terminal Box
Order on request
These products are requested only from ZSE. Our employees will contact you as soon as possible with an offer.
Order on request
This product is ordered on request!
An account at myZSE gives you the opportunity to order this product directly.
Can-Bus converter for strain gages.
The NTB-Series provide signal conditioning and A/D-converters for four strain gauges, voltages or thermocouples per network terminal box. Up to 99 NTBs can be used in one distributed CAN-network for up to 396 channels.
Features:
- Easy CAN-Bus wiring for distributed data acquisition
- Maximum length of one CAN-Bus segment: 1km
- Four channels per NTB Box
- Direct connection of quarter bridges (120 or 350 ohms gage resistance)
- Direct connection of full- and half-bridges (120 to 1000 ohms gage resistance)
- One AC-power supply can drive up to eight NTBs
- Scaninterval: 0.5 Sec. and 1 Sec.
- Measurement range - strain: 0 ... ±300000 µm/m / -30 ... 70 °C (T-Series Civil-Engineering Transducers) Resolution: 1µm/m or 0,1°C
- Measurement range - voltage: ±10V / ±50V Resolution: 100µV / 1mV
- Measurement range - thermocouple: -200°C to +1300°C (depending on TC Type) Resolution: 0,1°C
- Accuracy (Strain): ±0,05%
- TEDS-Sensor ID Support
- Environmental: -10 ... 50 °C / 20 ... 85% RH (non condens.)
- DC-Power Input. 11 ... 16 VDC
- “Easy-to-use” Software (NTB-10A), SDK (DLLs) and MS-Excel macros
- Compatible to KYOWA Dataloggers and Recorders (SME and EDX Series)
Your search returned no results.
NTB-100B-120
- 4-Kanal CAN-Network Terminal Box für DMS und DMS-basierende Aufnehmer
- U const / Federzugklemmen
- Für Halb- und Vollbrücken von 120 bis 1000 Ohm sowie für 120 Ohm Viertelbrücken.
- Inkl. Software NTB-10A
Request
S
NTB-100B-350
- 4-Kanal CAN-Network Terminal Box für DMS und DMS-basierende Aufnehmer
- U const / Federzugklemmen
- Für Halb- und Vollbrücken von 120 bis 1000 Ohm sowie für 350 Ohm Viertelbrücken.
- Inkl. Software NTB-10A
Request
S
NTB-101A-120
4-Channel CAN-Network Terminal Box for strain gages
- Constant-voltage bridge excitation
- Screwsolder terminal
- For Half- and full bridges (120 to 1000 Ohms) and 120 Ohms quarter bridges
Request
S
NTB-101A-350
4-Channel CAN-Network Terminal Box for strain gages
- Constant-voltage bridge excitation
- Screwsolder terminal
- For Half- and full bridges (120 to 1000 Ohms) and 350 Ohms quarter bridges
Request
S
NTB-110B-350
- 4-Kanal CAN-Network Terminal Box für DMS und DMS-basierende Aufnehmer
- - I const / Federzugklemmen
- Nur für 350 Ohm Vollbrücken und Sensoren aus der Baumesstechnik mit Temperatur-Messfunktion.
- Inkl. Software NTB-10A
Request
S
NTB-111A-350
4-Channel CAN-Network Terminal Box for strain gages
- Constant-current bridge excitation
- Screwsolder terminal
- For Full bridge method 350 ohm and civil engineering transducers with temperature measuring function.
Request
S
NTB-201A
4-Channel CAN-Network Terminal Box for Voltages and thermocouple measurements
incl. Software.
Request
S
NTB-20A
Power Supply Box
NTB power supply box.
NTB-20A supplies power and performs communication through a
one-wire interface when taking measurements with the NTB Series.
The NTB Series can be operated by connecting a PC and the
NTB-20A via a USB cable.
The NTB Series can be operated with an AC power supply or USB bus power.
- Connection
-
USB
- Length
-
100
m
- Power Saving Functions
-
Provided
In POWER switch "AUTO" mode (*1)
(*1) In "AUTO" mode, turning off the PC power supply automatically turns OFF the power supply to the NTB-20A (NTB power supply box).
When using "AUTO" mode, ensure that the PC and NTB-20A (NTB
power supply box) are connected using a USB cable.
- Operating Temperature
-
-10 –
50
°C
- Operating Humidity
-
20 –
85
% RHI
- Power Supply Input
-
USB 5 VDC
External power supply: 11 to 16 VDC
- Current Consumption
-
When using 12 VDC (Using AC adapter)
OFF mode: 7.0 mA or less
AUTO mode: 7.0 mA
ON mode: 30.0 mA or less
When using 5 VDC (Using USB port)
OFF mode: 5.0 mA or less
AUTO mode: 30.0 mA or less
ON mode: 30.0 mA or less
- Dimensions
-
150x
55
x
28
mmI
- Weight
-
260
g
- Optional accessories
-
Connection cable
N-38 (1 m)
N-39 (2 m)
Communications cable
N-102 (1 m)
H11681 (3 m)
H-11682 (5 m)
H-11683 (10 m)
Request
S
NTB-21A
Relay Box
NTB relay box.
The NTB-21A is used to place the NTB Series devices in different locations. This relay box is used in combination with the NTB-20A
and power/communication cable.
- Power Supply Function
-
When power supply exceeding the range is input into NTB, the power supply output from the serial connector is turned to OFF.
- Input Voltage Range
-
11 –
16
V
- Operating Temperature
-
-10 –
50
°C
- Operating Humidity
-
20 –
85
% RHI
- Dimensions
-
150x
29
x
28
mmI
- Weight
-
160
g
Request
S
D
UNI318-1215-AC
AC adapter for TPS-A, NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-10 [...]
Request
S
UNI318-1215-AC
AC adapter for TPS-A, NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB-110B-350, NTB-111A-350, EDS-400A
- Produkt Name
-
AC adapter
- Models
-
TPS-A, NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB-110B-350, NTB-111A-350, EDS-400A
S
D
UNI318-1215-EDS
AC adapter for NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB- [...]
Request
S
UNI318-1215-EDS
AC adapter for NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB-110B-350, NTB-111A-350, EDS-400A, ERK-101A, MRS-111AS2, TPS-A-5NM to TPS-A-5KNM
- Produkt Name
-
AC adapter
- Models
-
NTB-500A, NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB-110B-350, NTB-111A-350, EDS-400A, ERK-101A, MRS-111AS2, TPS-A-5NM to TPS-A-5KNM
S
D
P-76
DC power supply cable
Request
S
P-76
DC power supply cable
4-pin plug to 2 twisted pair conductors, pre-soldering at the cable tip for MCD-A，MCF-A, ERK-101A, UCAM-60B-DC, 65B-DC, UCAM-60C-DC, 65C-DC, NTB-100 series, NTB-500A, EDX-100A, 200A, EDS-400A, MCA-200A, MRS-111A, Housing Case YC-A
- Length
-
1.8
m
- Models
-
MCD-A，MCF-A
ERK-101A
UCAM-60B-DC, 65B-DC
UCAM-60C-DC, 65C-DC
NTB-100 series
NTB-500A
EDX-100A, 200A
EDS-400A
MCA-200A, MRS-111A
Housing Case YC-A
S
D
N-38
USB Type A to USB mini type B cable for DBU-120A, PCD-400A, 430A
Request
S
N-38
USB Type A to USB mini type B cable for DBU-120A, PCD-400A, 430A
- Length
-
1
m
- Produkt Name
-
USB cable
- Models
-
DBU-120A
PCD-400A, 430A
S
D
P-72
Ground wire with crimp-style terminal to bared tip for NTB-500A, 100A-120/350,100B-12 [...]
Request
S
P-72
Ground wire with crimp-style terminal to bared tip for NTB-500A, 100A-120/350,100B-120/350, 101A-120/350,110A-350, 110B-350, 111A-350, PCD-300 series, PCD-400A/430A, EDX-200A, 5000A, Housing Case YA/YC
- Length
-
5
cm
- Models
-
NTB-500A, 100A-120/350,100B-120/350, 101A-120/350,110A-350, 110B-350, 111A-350, PCD-300 series, PCD-400A/430A, EDX-200A, 5000A, Housing Case YA/YC
S
N-103
CAN-Bus Y-Cable
- Length
-
1
m
- Models
-
NTB-100A-120/350, 100B-120/350 , 101A-120/350 , 110A-350, 110B-350, 111A-350
S
D
N-102
CAN-Nus Cable1m long (other lenth on request)
Request
S
N-102
CAN-Nus Cable
1m long (other lenth on request)
- Length
-
1
m
- Models
-
NTB-100A-120/350, 100B-120/350, 101A-120/350, 110A-350, 110B-350, 111A-350
S
D
H-11681
Remodeled version of communication cable N-102: Connection cable for NTB-100A-120/350 [...]
Request
S
H-11681
Remodeled version of communication cable N-102: Connection cable for NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 111A-350
- Length
-
3
m
- Models
-
NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 111A-350
S
D
H-11682
Remodeled version of communication cable N-102: NTB-100A-120/350, 100B-120/350, 110A- [...]
Request
S
H-11682
Remodeled version of communication cable N-102: NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 110A-350, 111A-350
Both ends with 9-pin female D-sub
- Length
-
5
m
- Models
-
NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 110A-350, 111A-350
S
D
H-11683
Remodeled version of communication cable N-102: Connection cable for NTB-100A-120/350 [...]
Request
S
H-11683
Remodeled version of communication cable N-102: Connection cable for NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 110A-350, 111A-350
Both ends with 9-pin female D-sub
- Length
-
10
m
- Models
-
NTB-100A-120/350, 100B-120/350, 110A-350, 110B-350, 110A-350, 111A-350
S
CN-1A
Connection plate
- Produkt Name
-
Connection board//clip
- Models
-
NTB-100B-120, NTB-101A-120, NTB-100B-350, NTB-101A-350, NTB-110B-350, NTB-111A-350
S
D
CANTERM 120
Terminal resistor für NTB-100 Series, NTB-200 Series, NTB-500A
[...]
Request
S
CANTERM 120
Terminal resistor für NTB-100 Series, NTB-200 Series, NTB-500A
- Produkt Name
-
Terminating resistor
- Models
-
NTB-100 Series, NTB-200 Series, NTB-500A
S
D
LEAF LIGHTS HS V2
USB/CAN converter for NTB-100 Series, NTB-200 Series, NTB-500A
Request
S
LEAF LIGHTS HS V2
USB/CAN converter for NTB-100 Series, NTB-200 Series, NTB-500A
- Produkt Name
-
USB/CAN converter
- Models
-
NTB-100 Series, NTB-200 Series, NTB-500A
S
D
DRA-1
DIN rail mounting plate
Request
S
DRA-1
DIN rail mounting plate
- Produkt Name
-
DIN rail mounting plate
- Models
-
NTB-100 Series, NTB-200 Series, NTB-500A
S
