WGA-710C is a compact, lightweight, multi-functional and low-cost amplifier with display and it is designed to measure load, pressure, torque and displacement. Using low noise amplifier is helpful to achieve stable measurement. It is easy to conduct setting and control for each function by using keys. Since all setting values are recorded in a NVRAM, it still functions in case of power failure. It has been widely used in machinery, electric machinery, food and chemistry. Apart from production line control system.
Features:
1 input channel for strain gages or transducers (87.5Ohm .. 10kOhm)
High/Low limit comparator and relay outputs.
Compact, lightweight, highly noise-resistant and suitable as industrial instrumentation amplifier.
Various functions extend the application range.
Key lock function prevents erroneous operation.
LED illuminated keys for confirmation of the operating status at a glance.
Bridge excitation voltage suitable for connected transducer is selectable from 10, 5 or 2.5 VDC by the switch
Built-in remote sensing circuit enables highly accurate measurement.
Built-in analog peak hold circuit enables measurement of quickly changing variables.
Setting conditions are stored in nonvolatile memory against power failure.
Many different models are available.
Produkte
Für Ihre Suche wurden keine Ergebnisse gefunden.
WGA-710C-0
English Version.
Kanäle
1
applicable-transducers
Strain-gage transducers
Geeigneter Brückenwiderstand
87,5 –
10000
ΩI
Messbereich
±3.2 mV/V (±6400 ×10-6 strain)
Brückenspeisespannung
10, 5, 2.5 VDC, switchable Remote sensing possible for 120 mA or less
VDC
Interfaces : Compatible with IEEE1451.4 Mixed Mode Transducer Interface Class2 Applicable Transducers : Should have the information according to IEEE Template No.33 Cable length should be 30 m or less (No remote sensing is used together with TEDS)
Betriebstemperatur
-10 –
40
°C
Betriebsluftfeuchtigkeit
0 –
80
% RHI
Netzteil
100, 115, 200, 220 VAC (Select one), 20 VA or less, 11 to 30 VDC on request
Abmessungen
72x
188
x
144
mmI
Gewicht
1,7
kg
Standard Zubehör
AC power cable P-23 (For 100 VAC) Spare fuse, miniature screwdriver for terminal board connection, instruction manual, unit seal
4-digital BCD value, minus sign, OVER signal, print command (EOC); positive or negative logic selected by the switch
Anschluss
57-40360 (DDK) or the equivalent
Standard Zubehör
AC power cable P-23 (For 100 VAC) BCD output connector BCD-CONNE (57-30360 (DDK) or the equivalent) Spare fuse, miniature screwdriver for terminal board connection, instruction manual, unit seal
4-digital BCD value, minus sign, OVER signal, print command (EOC); positive or negative logic selected by the switch.
Anschluss
57-40360 (DDK) or the equivalent
Standard Zubehör
AC power cable P-23 (For 100 VAC) BCD output connector BCD-CONNE (57-30360 (DDK) or the equivalent) Spare fuse, miniature screwdriver for terminal board connection, instruction manual, unit seal
Signal Level: ＋10 V, 20 mA for the full scale setting on the case
Stromabgabe
4 –
20
mAI
Frequenzbereich
Depends on the sampling cycle (Approx. 15 times/s)
Ausgangsspannung
0 –
10
VI
Nichtlinearität
Within ±0.1%FS
% FS
withstand-voltage
500 VAC for one minute with the case
mit BCD Datenausgang
output-modes
Isolated open collector output
output-signal
4-digital BCD value, minus sign, OVER signal, print command (EOC); positive or negative logic selected by the switch
Anschluss
57-40360 (DDK) or the equivalent
Standard Zubehör
AC power cable P-23 (For 100 VAC) BCD output connector BCD-CONNE (57-30360 (DDK) or the equivalent) Spare fuse, miniature screwdriver for terminal board connection, instruction manual, unit seal
Kabelverlängerung für Wägezelle und Integration mehrerer Wägezellenausgänge in einem einzigen Kabel
A junction box is used when connecting a load cell and amplifier using an extension cable, or when connecting cables of multiple load cells, weighing a tank or hopper, to an amplifier using a single cable.
The SJB-C/D are designed for general purposes, for use under non hazardous and explosive environments.
Kabelverlängerung für Wägezelle und Integration mehrerer Wägezellenausgänge in einem einzigen Kabel
A junction box is used when connecting a load cell and amplifier using an extension cable, or when connecting cables of multiple load cells, weighing a tank or hopper, to an amplifier using a single cable.
The JBS-C is designed for use under hazardous and explosive environments.
Cable Diameter: 10 to 11 mm (Please specify the cable diameter)
KYOWA ELECTRONIC INSTRUMENTS CO., LTD. ist ein japanisches Unternehmen, das bereits seit 1951 alle Kernelemente der industriellen Dehnungsmesstechnik abdeckt.
Ihr Browser ist nicht mehr aktuell. Bitte verwenden Sie einen modernen Browser.
Dem Internet Explorer können wir leider nicht die volle Funktionalität dieser Webseite gewährleisten. Wir empfehlen Ihnen, einen modernen Browser (z.B. Chrome, Firefox, Edge, Safari) zu verwenden. Auch Microsoft rät aus Sicherheitsgründen von der Verwendung des Internet Explorers ab. Hier können Sie sich einen neuen Browser herunterladen:
