Signalaufbereitungskarten für Dehnung, Kraft, Spannung, Strom, Temperatur, Beschleunigung, CAN-Bus, etc.
Bestellung auf Anfrage
Diese Produkte werden bei ZSE angefragt. Unsere Mitarbeiter werden sich so schnell wie möglich mit einem Angebot bei Ihnen melden.
Bestellung auf Anfrage
Dieses Produkt wird auf Anfrage bestellt! Eine Eintragung bei myZSE bietet Ihnen die Möglichkeit dieses Produkt direkt zu bestellen.
Conditioner cards for EDX-100A, EDX-200A, and EDX-5000A.
EDX-5000A does not support CAN card CAN-41A.
Features:
The Cards are for measuring strain, voltage, acceleration, and temperature. CAN data is supported. Isolated amplifier cards and carrier-wave amplifier cards also available for countermeasure against noise.
Produkte
Für Ihre Suche wurden keine Ergebnisse gefunden.
CDV-40B
8 Kanal Verstärker & A/D-Wandler Einschub - 16 Bit Auflösung,
8 Ch. Strain/Voltage/Acceleration Measuring Card for Strain gages (transducers), Voltages (max.50V) and Piezo (IEPE)
Multi-functional input: In addition to strain and voltage signals, any of the 8 channels can input signals of piezoelectric acceleration transducer with built-in amplifier.
High Elongation Strain Measurement: Strain levels up to 500,000 um/m can be measured.
24-bit A-D converter: High resolution measurement is available with EDX-200A or EDX-3000A.
Antialiasing filters are provided standard.
Initial Value Check Function: Enables confirm initial value of strain-gage bridge and strain gage type transducer.
Designed for strain gages and strain gage transducers, the DPM-42B uses carrier frequency for bridge excitation, making it suitable for measurement of low level strain. The input and output as well as channels are isolated from each other.
Isolated 4 channel F/V Converter Card. Designed for measurement of input pulse frequency. The CFV-40A has a 12VDC power supply for sensors. Resolution: 16 Bits. Incl. 4x Voltage conversion adapter FV-1A Option: Input cable: U-12 Monitor output cable: H-10296
Multichannel High/Low-Speed CAN Card for optional Slot of EDX-200A-2H/4H.
(For EDX-200A-4T, please use ECAN-40A M72)
CAN input of up to 512 channels
CANdb-compatible
With 8-bit digital I/O
Capable of CAN data output
No drop in analog-channel sampling frequency
Capable of CAN data acquisition without sacrificing the number of analog channels
Incl. DCS-105A standard software
GPS Clock Synchronization Card for optional Slot of EDX-200A-2H/4H/4T.
For EDX-200A-4T, please use ETIM-40A M72.
Enable synchronized interval measurement between remotely-placed EDX-200A units by receiving clock data from GPS satellite.
8-bit digital I/O. incl. GPS-Sensor with 5m cable
GPS/Multichannel CANCard for optional Slot of EDX-200A-2H/4H
For EDX-200A-4T, please use EGPC-40A M72.
Simultaneous acquisition of GPS & CAN data witout using a PC
High Speed and Low Speed CAN input of up to 512 channels
CANdb-compatible
8-bit digital I/O
Capable of CAN data output
No drop in analog-channel sampling frequency
Capable of CAN data acquisition without sacrificing the number of analog channels, incl. DCS-105A standard software.
Operation temperature range: 0 to 50 °C (Moisture Proof Model: -20 to 65 °C)
Including:
1x GPS Antenna with cable length 5m
1x Software for GPS data acquisition DCS-105A
1x Connector plug for digital I/Oport
1x Shell case for digital I/Oport
One-touch Lock Bridge Box for 120 Ohm Quarter/half/full bridges
Indicates connection status.
Dimensions 154(W) x 22(H) x 61.4(D) mm (excluding protrusions)
Weight:Approx. 280 g
One-touch Lock Bridge Box for 350 Ohm Quarter/half/full bridges Indicates connection status. Dimensions 154(W) x 22(H) x 61.4(D) mm (excluding protrusions) Weight:Approx. 280 g
8 ch Bridge Box with Clamp style one-touch terminal.
For DPM-42B & CDV-40B
Quarter bridge 2-wire system & Quarter bridge 3-wire system
Half bridge system, Opposite side 2-active-gage system and Full bridge system
Cable of mainframe Chloroprene-coated 1.5 m long for each channel with Connector P12-7 each
Ihr Browser ist nicht mehr aktuell. Bitte verwenden Sie einen modernen Browser.
Dem Internet Explorer können wir leider nicht die volle Funktionalität dieser Webseite gewährleisten. Wir empfehlen Ihnen, einen modernen Browser (z.B. Chrome, Firefox, Edge, Safari) zu verwenden. Auch Microsoft rät aus Sicherheitsgründen von der Verwendung des Internet Explorers ab. Hier können Sie sich einen neuen Browser herunterladen: