S-CAN single slices
- Distributed CAN based measurement
- Connection for any sensor
- Fully compatible with CANLOG series
S-CAN single CAN DAQ modules
Compact, ruggedized and flexible
Order on request
These products are requested only from ZSE. Our employees will contact you as soon as possible with an offer.
Order on request
This product is ordered on request!
An account at myZSE gives you the opportunity to order this product directly.
Specifications
- Sample Rate
- 0.01 – 1000 HzI
- CAN-Bus-Baud-Rates
- 50, 100, 125, 200, 250, 333.33, 500 and 1000 kBaud
- Power Supply
- 8 – 60 VI
- Connector Type
- 2x Lemo 1B 4 pin for CAN and power supply
- Temperature Range
- -40 – 85 °C
- Operating Humidity
- 5 – 95 % RHI
- Degree of protection
- IP65
- Dimensions
- 170x 110 x 29 mm
- Weight
- 0.56 kg
Instruments
Products
Your search returned no results.
S-CAN TH8-K
8 channel isolated thermocouple or voltage inputs
Thermocouple input for Type K
1000 S/sec simultaneous sampling rate
CJC on each channel
Input ranges: Voltage: ±15mV..1.5V or Temperature: -270°C .. 1372°C
Input connector: TC Mini
Accuracy: ±0.02 % of reading ±0.5°C ±5 μV
Operating temperature: -40°C .. +85°C
S-CAN TH8-UNI
8 channel isolated thermocouple or voltage inputs
Universal Thermocouple input for Type J, K, T, E, R, S, B, N
1000 S/sec simultaneous sampling rate
CJC on each channel
Input ranges: Voltage: ±15mV..1.5V or Temperature: FS of TC type
Input connector: TC Mini
Accuracy: ±0.02 % of reading ±1°C ±10 μV
Operating temperature: -40°C .. +85°C
S-CAN-TH4-K-HVs
4 channel high voltage isolated voltage/thermocouple module, Type K;
Input ranges ±15mV..1.5V, -270..+1350°C;
Input connector: LEMO Redel 2P, 8-polig, Code B;
Basic accuracy: ± 0.5°C ± 0.02%, up to 1000 S/sec, 24Bit ADC;
Operating temperature: -40°C .. +85°C
S-CAN STG4-S
Isolated 4 ch Strain gage input module
For full bridge (6 or 4 wire) or half bridge (3 or 5 wire)
ADC type: 24 bit delta-sigma
System Sample rate: 1000 S/sec, simultaneous (50 S/sec AC excitation)
Input range ±40mV/V
Excitation: +2.5 VDC or 2.5 VAC (Square)
Input Connector: Lemo 1B, 10 pin,
Accuracy: ±0.03 % of reading ±1 µV/V( @DC excitation)
Operating temperature: -40°C .. +85°C (-40°C .. +75°C with 120 R bridge resistance)
S-CAN-STG6
6 channel strain gage module (full, half and quater 120/350R);
Input ranges: 0.5mV/V .. 200mV/V, Excitation: 1, 2 or 4Volt;
Basic accuracy: ± 0.05%; up to 1000 S/sec, 24Bit ADC;
Input connector: Lemo 1B 7pin; 2, 3, 4, 5 or 6-wire connection;
Operating temperature: -40°C .. +85°C
S-CAN-STG8
8 channel strain gage module (full, half and quater 120/350R);
Input ranges: 0.5mV/V .. 200mV/V, Excitation: 1, 2 or 4Volt;
Basic accuracy: ± 0.05%, up to 1000 S/sec, 24Bit ADC;
Input connector: Phönix 1844620; 2, 3, 4, 5 or 6-wire connection;
Operating temperature: -40°C .. +85°C
S-CAN CNT4
4 channel counter/ 12 channel DI module for Event counting, Frequency, Duty Cycle, PWM,
Input range: 350 kHz, 32 Bit, Prog. Excitaiton: 0 .. 15V,
Input Connector: Lemo 1B, 7 pin,
Basic accuracy: 2ppm, up to 1000 S/sec, operation temperature: -40°C .. 85°C
S-CAN LV4
4 channel isolated voltage / current module,
Input ranges: ±100mV..60V, and ±30mA,
Programmable excitation: ±0, 0.5, 1.25, 2.5, 5, 7.5, 10, 12.5 and 15V
Current limit: 60 mA (0.8 W max.) per channel
Separate programmable excitation on each channel
Input connector: Lemo 1B 7pin,
Accuracy: ±0.05 % of reading ±0.5 mV,
Operating temperature: -40°C .. +85°C
S-CAN LV6
6 channel isolated voltage / current module,
Input ranges: ±100mV..60V, and ±30mA,
Programmable Excitation: ±0, 0.5, 1.25, 2.5, 5, 7.5, 10, 12.5 and 15V
Current limit: 100 mA (1.5 W max.) per module
Common excitation voltage for all 6 channel per module
Input connector: Lemo 1B 7pin,
Accuracy: ±0.05 % of reading ±0.5 mV,
Operating temperature: -40°C .. +85°C
S-CAN RTD6
6 isolated temperature (PTxxx) or resistance inputs
Input ranges -200°C to +850°C, or 2, 20, or 200k?
Input connector: Lemo 1B 7pin, 2-, 3- or 4-wire connection,
Basic accuracy: ± 0.15°C ± 0.05%, up to 1000 S/sec, operating temperature: -40°C .. +85°C
Accessories
Downloads
DEWESoft
DEWESoft developed and manufactured multi-functional and user-friendly data acquisition instruments since 2000.