|
DS-43A Bundle
|
Included in the package:
- DS-43A (8x AI, 8 Counter, 2x isolated CAN, 2x Sync. connector)
- DEWESoft 7 Prof. + CAN option
- Padded carrying bag
- Power supply with cable
- MINI USB cable
- Device ground cable
|
 |
|
|
DS-43-UP-DSA
|
Additionally offers measurements for Industrial Acoustic, Structural Analysis and Machinery Diagnosis.
Industrial Acoustic: Real time narrow band FFT, Real time 1/1, 1/3, 1/12, 1/24 band octave spectrum, Real time A-, B-, C-, D-weighting, Fast- Slow- Impulse-weighting, Leq-Calculation, Sound Level according IEC 60651, 60804, 61672.
Structural Analysis: Measurement of transfer functions (FRF) for SISO, SIMO and MIMO configurations with H1, H2 and Hv algorithm. Excitation can be either an impulse (modal hammer) or continuous. In this case internal function generator (OPT-FGEN) or external generator source might be used. Structure geometry can be created or imported from UNV, online measurements of FRF, coherence, phase and amplitude is possible.
Machinery Diagnostics: Order Analysis, rotational and torsional vibration, waterfall diagram.
Human Body Vibration according to ISO 8041, ISO 2631-1.
|
|
|
|
SYNC-CBL-05M
|
Hardware synchronization cable for DS-43 or DS-MINITAUR.
Cable length 0.5 meter.
|
|
|
|
SYNC-CBL-3M
|
Hardware synchronization cable for DS-43 or DS-MINITAUR.
Cable length 3.0 meter.
|
|
|
|
MSI ACC adapter
|
Isotron (constant current powered) adapter for IEPE (ICP®) sensors (accelerometers, microphones). Excitation current 4 mA, 21 V, high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic adapter identification.
|
|
|
|
MSI Charge input adapter
|
Charge input adapter
range up to 50000 pC, AC coupled with 0.07 Hz, BNC signal connection, max. 100 kHz bandwidth, automatic adapter identification.
|
|
|
|
MSI RTD
|
Pt100, Pt200, Pt500 and Pt1000 adapter. 2, 3 and 4 wire connection methods over 5-pin Binder 710 series connector, automatic adapter identification.
|
|
|
|
MSI Temperature adapter
|
Thermocouple adapter. High accuracy cold junction reference measurement, 1 m thermo cable with Mini TC connector, automatic adapter identification. Please select TC-Type: J, K, T or C.
|
|
|
|
MSI Voltage 200VDC
|
200 Volt input adapter. Differential input configuration over BNC connector, bandwidth and ranges are defined by connected amplifier, automatic adapter identification.
|
|
|
|
DSUB9 to BNC adapter
|
For connecting sensors with coaxial connector to the DS-43
|
|
|
|
BRIDGE-1/4-120
|
Bridge Completion Terminal 1/4 - 120 Ohm
2.5V Excitation Voltage.
Also available for 1/2 bridges
|
|
|
|
BRIDGE-1/4-350
|
Bridge Completion Terminal 1/4 - 350 Ohm
2.5V Excitation Voltage.
Also available for 1/2 bridges.
|
|
|
|
BRIDGE-FULL-2.5
|
D-Sub Terminal for full bridge Strain Gages and Transducers,
2,5V Excitation Voltage.
|
|
|
|
Full connector set
|
Full connector set for DS-43 and DS-Minitaur,
Includes 8x 7-pin LEMO counter connectors,
8x DSUB9 Male analog connectors,
2x DSUB9 female CAN connectors.
|
|
|
|
Connector set
|
Connector set for DS-43 and DS-Minitaur,
Includes 2x 7-pin LEMO counter connectors,
8x DSUB9 Male analog connectors,
2x DSUB9 female CAN connectors.
|
|
|
|
D-Sub-9 Screw
|
9 pole DSUB Connector (male) with screw terminals,
and fully metallic housing.
|
|
|
sofort Lieferbar
Lieferzeit nach Rücksprache
