WGA-900A - Instrumentation Amplifier

The new panel mount Instrumentation Amplifier WGA-900A by KYOWA features a 3.5" color LCD graphic display for wave forms and digital readings. It measures strain-gages and strain gage based transducers 4000 times per second with an resolution of 24 bits. The measured data is scaled and presented on the touch-panel-display. A selectable filter smoothes the curve if needed. The data is available on an analog monitor output, a serial interface or can be saved on a SD-Card for further analysis. Programmable alarms can detect abnormal conditions and switch digital output lines.

Features:

• The measurement waveform can be displayed.
• Touch-sensitive 3.5-inch STN color LCD ensures easy operation and monitoring.
• The measurement waveform can be recorded (optional SD card is necessary).
• Characters are large and easy to see.
• TEDS compatibility for TEDS-based automatic calibration.
• 5 Comparator Settings: extra high (HH), high (HI), OK, low (LO), extra low (LL).
• Comparison value, hysteresis band, comparator output logic and using comparator can be set.
• Measurement Modes: Normal, peak hold, block-specified peak hold, time-specified peak hold, bottom hold, block-specified bottom hold, time-specified bottom hold, arbitrary point hold.
• Detection times, delay time, comparison mode and display mode can be set.
• Waveform Display: Waveform start mode, transit level, level transit direction, waveform hold time.
• Control Inputs for: Zero, Hold, Reset , waveform and TEDS commands.
• Control Outputs: Alarms (HH, HI, OK, LO and LL), healthy, abnormal channel, abnormal memory, communication error, SD-Card status.
• Interfaces: RS-232; Optional: BCD output, D-A output, RS-485.
• Dimensions: 100(W) x 96(H) x 135(D) mm.
• Power Supply: 85 to 264 VAC, 50/60 Hz; 20 VA or less.

 Please find the data sheet in the download section.