Control Software for Pocket PC

The control software enables a Pocket PC to set measuring conditions, suppress zero, start the EDS-400A recording, and monitor data in numeric and graphic formats. The Pocket PC may be either hardwired or wirelessly connected to the EDS-400A via LAN. Operating environment: Pocket PC 2003

Measuring condition setting functions
Sensors: Strain gages, strain-gage transducers, voltage-output sensors
Number of measuring channels: Max. 32 (with 8 units of EDS-400Aconnected in cascade)
Sampling frequency: 1, 2, 5, 10, 20, 50, 100, 200, 500 Hz, 1, 2, 5, 10, 20, 50, 100 kHz
Measuring mode: Manual, analog trigger, external trigger
Number of measuring values: Selectable in a range of 0 to 4294967295 (depends on the blank space of CR card)
Setting to 0 lets the EDS-400A record to the full capacity of CF card.

Measuring channel condition setting functions
Selection of measuring channels: Possible
Range: Selectable for each measuring channel
Strain: 1000, 2000, 5000, 10000, 20000 µm/m or OFF
Voltage: 1, 2, 5, 10, 20 V or OFF
Lowpass filter: A cutoff frequency is selectable for each measuring channel from the following: FLAT (20 kHz), 2 kHz, 200 Hz and 20 Hz
Calibration coefficient: A value by which every measured value ismultiplied can be set for each measuring channel.
Offset: An offset value which is added to every calibrated value canbe set for each measuring channel.
Engineering unit: Selectable from 60 kinds for each measuringchannel. Input of an optional unit is also possible.
Channel name: Can be input for reference.
Zero suppress: ON/OFF setting possible for each measuring channel