ASW-A Waterproof Acceleration Transducers (±9.807 to ±196.1 m/s² (1 to 20 G))
| Rated output | 0.5 mV/V (1000x10–6 strain) min. |
| Non-linearity [%RO] | +/-1 |
| Hysteresis [%RO] | +/-1 |
| Input resistance | 122 Ohm +/-1.6% |
| Output resistance | 122 Ohm +/-1.6% |
| Recommened excitation voltage [V] | 1 – 3 AC or DC |
| Safe excitation voitage [V] | 6 AC or DC |
| Transverse sensitivity [%] | +/-4 |
| Safe temperature range [°C] | -15 – 65 |
| Damping ratio (at 23°C), approx. | 0.64 |
| Safe overload rating [%] | 300 |
| Withstand water pressure [kPa] | 490.3 (5 kgf/cm²) |
| Installation |
Using the adhesive CC-33A or the mount base option DK- 1C or DK-1D (made of aluminum alloy; see figure below) Material of case: Corrosion-resistant aluminum, alumite treated |
| Mass, approx. | 40 g |
| Cable | 4-conductor (0.08 mm²) chloroprene shielded cable, 5 m long, ø 4 mm; terminated with NDIS connector plug; underwater application available by connecting to another cable using the scotch cast JB-200A |
