You are here
> Home
> Transducer &...
> Pressure
> Micro differ...
> PDS-A/PDV-A ...
> PDS-A - With...
PDS-A - With strain output
| Performance | |
| Non-linearity [%RO] | +/-0,5 (25GA: ±0.7%RO) |
| Hysteresis [%RO] | +/-0,3 |
| Environmental characteristics | |
| Safe temperature/humidity range [°C] | -20 – 70 20 to 80%RH (0 to 50°C) |
| Compensated temperature range [°C] | 0 – 50 |
| Pressure medium | Air in general (gases that are not corrosive) |
| Mechanical characteristics | |
| Max. line pressure [MPa] | 100 (1,020kgf/cm²) |
| Natural freq. (app.) [Hz] | 1,7 |
| Posture effects | Zero drift of +/-0.3%RO (+/-0.8%RO on 10GA) when tilted upward or downward by 90° with the horizontal posture taken as standard |
| Internal volume |
HIGH side: 0.2 x 10–6m3 (0.2cc) LOW side: 1 x 10–6m3 (1cc) |
| Pressure joint | Ø 4,7mm volute joint |
| Electric characteristics | |
| Non-load output voltage [mV] | +/- 10 |
| Bridge output resistance [kOhm] | 4 – 6 |
| Power requirements | DC10V (9,5 to 15 V), 5 mA or lower (A mating signal conditioner’s bridge power can be used) |
| Cable |
0,05mm², 4-conductor shielded chloroprene 3 m, Ø 3 mm, terminated in connector plug (NDIS) |
| Mechanical characteristics | |
| Weight [g] | 40 (approx.) |
